News

How to avoid burnout of industrial washing machine motor

Update:29-11-2019
Abst:

How do industrial washing machine motors burn out? Some […]

How do industrial washing machine motors burn out? Some industrial washing machine motors used in laundry rooms have burned out, so how can we avoid this? The following is an industrial washing machine manufacturer Taizhou Henghao Xiaobian.
1. First of all, we must ensure the cleanliness of the motor of the industrial washing machine. When the industrial washing machine is running, no dust, water stains and other various debris should be allowed at least 3m around the air inlet of the motor. In this way, these debris are sucked into the industry. Inside the motor of the washing machine, a short-circuit medium is formed, which damages the insulation layer of the wire in the motor, causing a short circuit and burning the motor.
2. Do not overload the industrial washing machine. If the industrial washing machine is overloaded, the motor of the industrial washing machine will be overloaded and the voltage will be too low. If the motor of an industrial washing machine is overloaded for a long time, the motor will absorb a lot of active power from the grid. In this way, the motor current of the industrial washing machine will increase rapidly, and the temperature will increase accordingly. The high temperature will age the insulation layer of the motor and eventually burn it. Motor.
3. Ensure that the temperature of the motor of the industrial washing machine is within a reasonable range. For the motor bearing, stator and housing, etc., it is necessary to see whether the temperature changes abnormally, especially for the industrial washing machine motor without voltage, current and overload protection. It is important that the detection of the rise is better. If the temperature of the industrial washing machine motor rises too high, it will cause the motor to burn out.
4. It is necessary to check whether the three-phase current of the motor of the industrial washing machine is balanced, and only if the difference between any one phase current and the current of the other two phases does not exceed 10%, the industrial washing machine motor can run in a safe position, and Will not burn out.
How to avoid burning motors of industrial washing machines. The above are a few method descriptions summarized by industrial washing machine manufacturers. I hope everyone can refer to them and hope that the motors of industrial washing machines will be burned.
 
0
CONTACT US